Quick Contact

TXgard Plus

Flameproof toxic and oxygen gas detector with display




TXgard Plus is a flameproof (Ex d), ATEX and UL certified toxic or oxygen gas detector with local LCD display. A choice of sensors are available enabling use in a wide range of applications, including water treatment, oil and gas exploration, chemical plants and steel production.







Non-intrusive calibration

  • Calibration can be performed locally without the need for hot work permits - minimises operational down-time
  • Local display and buttons enable calibration without opening the junction box

Flexible output options

  • 4-20mA current sink or source - works with a wide selection of control panels
  • 3 wire format
  • Optional relays for alarm and fault - can be used for switching local alarms

Rugged and reliable

  • Constructed using marine-grade aluminium with a stainless steel sensor housing - proven track record for operation in the harshest environments
  • Ingress protection to IP65 as standard

Low cost of ownership

  • Non-intrusive one man calibration - easy to operate and maintain
  • Long life sensors - keeps interuption to on-site activity to a minimum
  • Simple parts replacement

Wide range of sensors

  • Carbon Monoxide, Hydrogen Sulphide and Oxygen range of electrochemical sensors available


Specifications

Size 200 x 115 x 115mm (7.9 x 6.1 x 6.1ins)
Weight 2.2kg (4.9lbs)
Ingress protection IP65
Enclosure material Junction box: Marine grade alloy
Sensor housing: 316 stainless steel
Power 10-30Vdc, 210mA max (relay version)
160mA max (non relay)
Cable entries 2 x M20 or 1/2” NPT
Operating temperature -10°C to +55°C (-14°F to 131°F) *
Humidity 15 to 90% RH non-condensing
Relays (optional) SPNO or SPNC contacts rated 
30Vdc 1A (non-inductive load) for Alarm 1, Alarm 2, Fault
Display 3-digit LCD back-lit display, LED status indicator
Calibration method Via magnetically operated buttons
Electrical output 3 wire 4-20mA, sink or source
Terminals Suitable for up to 1.5mm2 cable
Sensor type Electrochemical
Repeatability +/- 2% FSD typically
Zero drift +/- 2% FSD, 6 months typically
Response time Contact Crowcon for a full list of sensor response times
Performance Tested in accordance with EN60079-29-1
Hazardous area zones Zone 1 or 2
Approvals Ex II 2 G
Exd IIC T6 Gb
UL Class I Zone 1
EMC compliance EN 50270, FCC, ICES-003

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Figures shown exclude the sensors - Please contact Crowcon for a full list of sensor operating temperatures

Gases and Ranges

Gas Range Available
Carbon monoxide (CO) 100, 250, 500, 1000ppm
Hydrogen sulphide (H2S)          25, 50, 100, 200ppm
Oxygen (O2) 25% vol.

Manual

Certificate | Privacy Policy | Sitemap |